Setting The Clock Manually - Sangean DCR-89+ User Manual

Setting the clock manually

Normally your clock radio will set its clock automatically via the DAB signal.
If no DAB signal is available and you need to set the time manually, please follow the procedure
shown below.
Note:
The DAB signal will always override any manual time setting.
. To set the clock time, press the On / Standby button to switch on the clock radio. Press and
hold the Menu / Info button to enter the menu setting.
. Press the Tuning up / down button until 'System setting' is shown on the display. Press the
Select button to enter the setting.
3. Press the Tuning up/ down button until 'Time' is shown on the display. Press the Select button
to enter the setting.
4. Press the Tuning up / down button until 'Set Time/ Date' is shown on the display. Press the
Select button to enter the setting.
5. The hour digit will flash on the display. Press the Tuning up / down button to choose the desired
clock hour. Press the Select button to confirm the setting.
6. The minute digit will flash on the display. Press the Tuning up / down button to choose the
desired clock minute. Press the Select button to confirm the setting.
7. The date digit will then flash on the display. Press the Tuning up/ down to choose the desired
date. Press the Select button to confirm the setting.
8. The month digit will flash on the display. Press the Tuning up/ down to choose the desired
month. Press the Select button to confirm the setting.
9. The year digit will flash on the display. Press the Tuning up/ down button to confirm the setting.
Press the Select button to confirm the setting. Now the clock is completed and 'Time Saved' is
shown on the display.
GB
0