Fm Stereo / Mono - Sangean DCR-89+ User Manual

FM stereo / mono

If the FM radio station being listened to has a weak signal some hiss may be audible. It is
possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
. Press the Band button as needed to select the FM radio mode and tune to the required FM
station as previously described.
. Press and hold the Menu / Info button to enter the menu setting.
3. Press and release the Tuning up / down button until 'FM Audio' shown on the display. Then
press the Select button to enter the setting. If the setting is Auto press the Tuning up / down
button to switch to Mono mode to reduce the hiss.
4. To return to Auto (stereo) mode press and release the Tuning up / down button again, so that
the digital receiver will switch back to Auto mode.
GB
6