Table of Contents
Advertisement
TH210-3 for MF
_____________________________________________________________________
Configuring the Printer
The Configuration Menu allows the user to set general printer
parameters. The test prints the settings for several functions, and
partially cuts the paper between each variation.
The printouts may vary for each model. The test ends with a partial cut
of the paper, then begins again. A test printout may use several feet of
paper to complete.
R e a r
C o v e r
To start the test:
_________________________________________________________
16
R e s e t
B u t t o n
P a p e r F e e d
B u t t o n
1.
Set DIP Switch 1 to ON position (down.) DIP Switch 2 must
always be set to ON position (down.)
2.
Place paper into the bucket as described in the previous
section, "Changing Paper."
3.
Press the Reset Button.
4.
Press and hold the Paper Feed Button while closing the cover.
B a c k o f P r i n t e r
S w i t c h 1 i s s h o w n
i n t h e O N p o s i t i o n
O f f
O n
D I P S w i t c h e s
D I P S w i t c h e s
1 2
Advertisement
Table of Contents
