Table of Contents
Advertisement
TH210-3 for MF
_____________________________________________________________________
Connect the Cables
Caution: Connect the cables to the printer before plugging in the
power supply. If power is received from the host computer, turn it off
before connecting any cables.
C o m m u n i c a t i o n
( R S - 2 3 2 C 25 - p i n
C o n n e c t o r s h o w n )
Note: Depending on your printer configuration, the connector panel
may vary from the above illustration.
Communication Cable
The communication cable connects the printer to the host computer. To
install the communication cable:
1) Turn off the host computer.
2) Open the Connector Cover at the rear of the printer.
3) Attach the Communication Cable to the connector shown on the
back of the printer above. Tighten the screws to secure the cable.
4) Connect the cable to the host computer.
_________________________________________________________
8
C o n n e c t o r
C o n n e c t o r
C o v e r
6 - p i n C a s h D r a w e r
C o n n e c t o r
B a c k o f
P r i n t e r
P o w e r
C o n n e c t o r
Advertisement
Table of Contents
