Scope Of Delivery; Mains Connection; Battery Power Supply; Initial Commissioning - KERN CXB 3K0.2 Operating Instruction

7.2.2 Scope of delivery

Serial accessories:
CXB models
Balance
Weighing plate
Mains power supply
Protective cover
Internal battery
Operating Manual

7.3 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.

7.4 Battery power supply

The optionally supplied battery is charged with the supplied power supply.
Before the first use, the battery should be charged by connecting it to the mains
power supply for at least 15 hours. The battery has a service life of c. 200 hours
without background lighting or 60 hours with background lighting. The charging pe-
riod for total charge is c. 8 hours
The appearance of the battery symbol
battery is almost exhausted. If no weighing process is carried out during the red LED
display, the balance will switch off automatically after about 20-30 minutes. Connect
the power adaptor as soon as possible to change the battery.
The LED display provides information about the battery's charging status.
red: Battery is almost discharged
green: Battery is completely discharged

7.5 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. 1). During this warm-
ing up time the balance must be connected to the power supply (mains, accumulator
or battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
18
CXP models
Platform
Terminal
Mains power supply
Protective cover
Internal battery
Operating Manual
in the weight display indicates that the
CXB/CXP-BA-e-1016