3.7 SERIAL PPP MENU
This submenu is for establishing a PPP connection via the Modem Cradle. You must
configure these parameters correctly.
Point-to-Point Protocol (PPP) is a method of connecting the mobile computer to the
Internet over serial links. It sends TCP/IP packets to a server that connects to the
Internet.
Note: (1) The menu is available only when an external library, 80PPP.lib, 80BNEP.lib, or
80WLAN.lib, is included in your program (.SHX).
(2) The version of IR control board on the Modem Cradle must be greater than
SV3.01.
3.7.1 INFORMATION
Information of library version can be viewed here.
Serial PPP Menu | 1. Information
LIB
PPP library version
BSC
BASIC Run-time version, if a BASIC application is downloaded.
Below are available libraries that support (1) PPP connection over serial links, and (2)
Ethernet connection – Transparent mode.
Series
Model #
8000
8000
8001
8062
8071
(batch)
(batch)
(Bluetooth)
(802.11b/g)
Chapter 3
External Libraries
80PPP.lib
80PPP.lib
80PPP.lib or 80BNEP.lib
80PPP.lib or 80WLAN.lib
System Menu
39
Need help?
Do you have a question about the 8000 and is the answer not in the manual?
Questions and answers