Cisco ASR 1001-X Installation Manual page 112

Removing and Replacing the Cisco ASR 1001-X Router Power Supplies
Figure 7-3
1
Cisco ASR 1001-X Router Standby switch, which does not disconnect power from the power
source.
Insert the power supply module into the appropriate slot(s), making sure that the retention latch is firmly
Step 2
placed. You can verify that the power supply module is firmly latched by gently pulling the power supply
handle.
Step 3 Insert the power supply cables firmly into the power supplies.
Note
Step 4 Ensure that the AC power cords are positioned, as shown in
Figure 7-4
Cisco ASR 1001-X Router Hardware Installation Guide
7-4
Cisco ASR 1001-X Router AC Power Supply Standby Switch
1
Ensure that both power supplies are inserted firmly and the power cords are in place.
Correct Position of the Cisco ASR 1001-X Router AC Power Supply Cables
1
2
Chapter 7 Removing and Replacing FRUs from the Cisco ASR 1001-X Router
Figure
1
2
7-4.
OL-32376-02