Table of Contents
Advertisement
BENDIX/KING
5.2.3.1
KLN 94 Software Updates
Either the Windows
-based GPS Database Loader program or the DOS-based SWLDR94.EXE
may be used to update the software in the KLN 94.
5.2.3.1.1
System Requirements
The DOS-based SWLDR94.EXE program requires a fully IBM-compatible computer running DOS
Version 3.3 (or higher). Microsoft Windows
order to run the SWLDR94.EXE program.
The Windows
-based GPS Database Loader requires a fully IBM-compatible computer (i486DX-
33 MHz or faster) with 8 MB of RAM minimum and a VGA or super VGA video (display and card).
Operating system must be Microsoft Windows
The mouse or a compatible pointing device must be supported by Microsoft Windows
Additional requirements for both the Windows
DOS-based SWLDR94.EXE include the following:
(1)
A hard disk with at least 5 MB available.
(2)
A functioning RS-232 serial communications port (COM1:, COM2:, COM3:, or
COM4:) must be available. The RS-232 serial COM port must be capable of com-
municating using 9600 baud, 8 data bits, 1 stop bit, odd parity, and Flow control:
None. For best performance, the COM port should be able to communicate at
115.2K baud (industry standard).
(3)
A PC interface cable which connects the KLN 94's data loader jack to the personal
computer. This cable can be obtained by ordering the PC Data Loader Kit for the
KLN 94 (part number 050-03612-0000). Order per the following:
Honeywell Navigation Services
Tel: (800) 247-0230 (U.S.)
Tel: (913) 712-3145 (International)
FAX: (913) 712-3904.
Email: nav.database@honeywell.com
Web site: www.gpsdatabase.com
(4)
A power supply source for the GPS unit. This source may be the aircraft or an ex-
ternal supply (if the KLN 94 is removed from the aircraft). For an external supply,
Honeywell recommends the following:
Commander 2000-K Desktop Control Station: Lone Star Aviation Corporation
804 North Great S. W. Pkwy, Arlington, TX 76011
Phone: (817) 548-7768
FAX: (817) 633-6208
(Contact Lone Star and ask for a brochure)
The LoneStar Commander 2000-K Desktop Control Station includes a 12 volt power
supply, cooling fan connection, RS-232 connector, and an external OBS LEG
switch. It is Compatible with the KLN 90/A/B, KLN 89/B, KLN 94, KLX 135A, and
KLN 35A.
5.2.3.1.2
Running the GPS Database Loader from the CD
To run the GPS Database Loader from the CD, select "Run" from the Windows
then enter the following:
x:\LOADER\GpsLoadr.exe
Page 5-2
3.1 users must exit from Windows
95/98/2000 or Windows
-based GPS Database Loader program and the
(where 'x' is the CD ROM drive letter).
15599M00.JA
KLN 94
to DOS mode in
NT Version 3.51/4.0.
.
"Start" menu and
Rev 0, Sept/2000
Hide quick links:
Advertisement
Table of Contents
