Forwarding Settings - Ricoh SP 210 SU User Manual

• This function is available for the Type 5 and 6 models only.
• The table below shows what happens after forwarding succeeds or fails depending on the
machine's configuration.
Forwarding [Print Received File]
Success
Success
Failure
Failure
• If the machine is unable to print out a fax due to machine errors such as an empty paper tray or a
paper jam, the fax will remain in memory. The remaining pages will start printing as soon as the
problem is resolved.
• The number of forwarding attempts and the attempt interval time can be specified using Web
Image Monitor. For details about the forwarding destination, forwarding trials and interval settings,
see page 169 "Configuring the System Settings".

Forwarding settings

To specify the forwarding conditions for received faxes, configure the machine as follows:
1. Press the [User Tools] key.
Automatic The machine prints out the fax and deletes it from
memory.
Manual The machine stores the fax in memory for later manual
printing.
Automatic The machine prints out a forwarding failure report, prints
out the fax, and then deletes it from memory.
Manual The machine prints out a forwarding failure report and
stores the fax in memory for later manual printing.
DCT845
Receiving a Fax
Results
123