Ricoh SP 210 SU User Manual page 222

10. Troubleshooting
Message
Memory Almost Full
Memory Overflow
Memory Overflow
Memory Overflow
TX
Cancel
Misfeed: BypassTray
Misfeed: Stnd. Tray
Misfeed: Tray 1
Net Communication
Error
220
Causes
Memory has almost reached
capacity during sort copy.
The data is too large or
complex to print.
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Paper has been jammed in the
bypass tray.
Paper has been jammed in the
paper exit area.
Paper has been jammed in the
tray 1 paper input area.
Connection with the server was
lost while sending or receiving
data.
Solutions
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
If using the PCL printer driver, set
[Resolution] in [Print Quality] to [600 ×
600 dpi].
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Remove the jammed paper. See page 202
"Paper Feed Problems".
Remove the jammed paper. See page 202
"Paper Feed Problems".
Remove the jammed paper. See page 202
"Paper Feed Problems".
Contact the network administrator.