Specifying The Scan Settings - Ricoh SP 210 SU User Manual

6. Sending and Receiving a Fax
6. If you hear a high pitched tone, press the [Start] key.
If [Operation] is set to [Easy Mode], proceed to Step 8.
7. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
8. Replace the handset.
• For details about [Operation], see page 137 "Fax Features Settings".

Specifying the Scan Settings

Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
1. Press the [Density] key.
2. Press the [ ] or [ ] key to select the desired density level, and then press the [OK] key.
114
DCT847
DCT874