Ricoh SP 210 SU User Manual page 25

1. [Image Quality] key
Press to select the image quality for the current job.
• Copier mode: select Text, Photo, or Mixed.
• Scanner mode: select the resolution.
2. [Shortcut to Func.] key
Press to enter ID card copy mode for the current job.
If you do not use the ID card copy mode frequently, configure [Shortcut to Function] in [Admin. Tools] to make
this key available for displaying scan file destinations. For [Shortcut to Function], see page 157 "Administrator
Settings".
3. [Copy] key (Type 2, Type 3 only)
Use this key to switch the machine to copier mode.
4. Power Indicator
This indicator lights up blue when the machine is turned on.
5. Alert Indicator
This indicator lights continuously in red when the machine runs out of paper or consumables or if another error
occurs.
It flashes slowly when the machine is running out of toner.
6. [Wi-Fi] key (Type 2, Type 3 only)
To switch to wireless LAN, press this key.
Press this key to display the menu for manually configuring the settings in Infrastructure or Ad-Hoc mode
selected in [Wi-Fi Key]. By holding down the key, you can display the menu for configuring the WPS using the
PIN code or in PBC mode. This key cannot be used if [Wi-Fi Enable] is set to [Disable].
7. [Density] key
Press to adjust image density for the current job.
• Copier mode: select from 5 levels of density.
• Scanner mode: select from 5 levels of density.
8. [Scanner] key (Type 2, Type 3 only)
Use this key to switch the machine to scanner mode.
Guide to Components
23