Accessories; To Connect The Parking Brake Connector Cable - Sanyo AVC-100 Installation And Operation Manual

ACCESSORIES

Power supply cable
AV cable
x1
Screw B (M5) Screw C (M4)
x4
x4
Outer trim ring Release key
x1
Remote controller
Metal strap
x1 x1
t CAUTION
¡Follow local rules and regulations for installing monitor.
¡Please contact your place of purchase if you have any questions about installation or connection.
7
Screw A (M5)
AV cable adapter
x1 x1
Self-lock connector
x2
Tapping screw Hexagonal bolt with
(M5 x 12) washer (M4 x 6)
x2 x1
Front panel case
x1

TO CONNECT THE PARKING BRAKE CONNECTOR CABLE (1)

Operation while driving is very dangerous. To protect customer safety, the operations while driving are
restricted. In order to judge driving or stopping, connect the parking brake connector cable. If parking
brake connector cable is not connected correctly, operations will be restricted while stopping as well as
driving.
* The parking brake signal line position varies depending on the vehicle model. Ask your auto dealer for details.
●When a parking brake is a hand brake type
x4
Sleeve
x1
●When a parking brake is a foot brake type
x1
(Example)
Take off the center console
Parking brake signal line
(Example)
Parking brake signal line
8