To Start Playback; Various Playback Functions - Sanyo AVC-100 Installation And Operation Manual

TO START PLAYBACK

Open up the monitor. zSee p.28
1
Insert disc in the unit with the printed side up. zSee p.36
2
: The unit automatically starts playback.
Hint
¡Depending on the disc, touch
!).
¡Depending on the disc, a menu may appear on the screen when a DVD is inserted. In this case, zSee
p.63.
¡The operation buttons appear for roughly 5 seconds. By touching the screen, the operation buttons appear
again.
¡To remove the operation buttons quickly, touch the screen.

VARIOUS PLAYBACK FUNCTIONS (1)

TO STOP PLAYBACK
Touch the screen and touch
controller, press $.) on the screen.
Playback stops. ("RESUME PLAYBACK FUNCTION" is activated.)
RESUME PLAYBACK FUNCTION
Ñ
¡By touching
position where you stopped playback, and starts Resume playback
even after the unit is turned off, or eject the playing disc. This is called
"RESUME PLAYBACK FUNCTION". When this function is active, the
image/audio is off.
¡After the disc being played is ejected, the unit stores the point where
you stopped playback for up to 10 discs and starts Resume playback.
¡In this case, when storing a resume point for the 11th disc, the stored
resume point for the 1st disc is cleared automatically.
■ To start playback
<How to playback from the position where it was stopped...
Touch the screen and touch
Playback will resumes from the position where it was stopped.
<How to playback the disc from the beginning...
q
Touch the screen and touch
w
Touch the screen again and touch
Playback starts from the beginning of the disc.
57
å/Ü
Ñ (on the remote
during playback, the unit will save in the memory the
again....
(on the remote controller, press !).
å/Ü
Ñ
on the screen to start palyback (on the remote controller, press
(on the remote controller, press $).
(on the remote controller, press !).
å/Ü
DVD
DVD