Switching The Audio Language; Changing The Angle - Sanyo AVC-100 Installation And Operation Manual

SWITCHING THE AUDIO LANGUAGE

DVD videos may have multiple audio languages programmed depending on the disc. If so, select the
desired language as per the instructions below.
1
Touch the screen during playback.
: Operation buttons appear.
2
Touch
AUDIO
(On the remote controller, press h.)
: The audio language appears.
¡ Every time the button is touched, the listed audio
languages programmed in the disc are switched.
Hint
¡The Audio Language can be switched at the menu on DVD (zsee p.63) on the language setting
(zsee p.65).
¡Depending on the disc, the audio language may not be changeable via the operation above. For such a
case, switch the language at the DVD menu (zsee p.63) or DVD setup (zsee p.65).

CHANGING THE ANGLE

Depending on the disc, the same scene appearing on DVD videos may have been programmed in
multiple angles (multi-angle recording). If so, you can switch to the desired angle available and enjoy the
movie.
1
Touch the screen during playback.
: Operation buttons appear.
2
Touch
ANGLE
(On the remote controller, press i.)
: The angle changes every time it is touched.
Hint
¡The angle cannot be selected if the disc has not been programmed with multi-angle imaging.
¡The total number of angles programmed varies depending on the disc and the recorded scene.
61
.
.
DVD
2
DVD
2