Download  Print this page

To Use Aux Function - Sanyo AVC-100 Installation And Operation Manual

Dvd receiver with 7-inch lcd monitor
Hide thumbs

Advertisement

Table of Contents

TO USE AUX FUNCTION

You can connect optional devices to the AUX terminal on the unit.
Open up the monitor. zSee p.28.
1
2
Select
AUX
function.
Ä
On the screen
Touch
AUX
.
Ä
On the front panel
Press N repeatedly to select
Ä
On the remote controller
Press d repeatedly to select
3
Touch either AUX1, AUX2, or AUX3 depending on the connected divices on the remote
controller, press BND/AUX n repeatedly to select.
AUX1 (1-Front lN)/AUX2 (2-Rear IN)
You can connect the audio device/video component (sold separately) such as portable memory audio
player, digital video camera, etc. to AUX1 and AUX2 jacks.
Touch
to select
Video/Audio
¡
.....Select this when you connect the audio device.
The wallpaper will be displayed on the screen.
¡
.....Select this when you connect the video component.
¡Connect with supplied AV cable. (Use a AV cable adapter when you connect the audio equipment.)
When you connect the digital video camera
When you connect the Portable memory audio
AV cable adapter
Note:
If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be
deactivated.
83
On the screen
AUX
.
AUX
.
or
.
AV Cable
AV/IN
AV Cable
AV/IN
AUX
AUX3 (3-Rear IN)
¡You can connect the rear view camera (sold separately) to AUX3 jack.
¡During the connection of the rear view camera. If you set REAR CAMERA to
(See p.43), you can check the camera view of the rear view camera without setting the shift lever
DISP
to the "R (reverse)". However, note that image of the rear view camera will be displayed only when the
parking brake is set. If you switch to
will be displayed when the shift lever is set to the "R (reverse)",
¡Make sure that the rear view camera cable is connected to the unit's AUX3 jack correctly.
¡Select
OFF
on
SETTING
camera to AUX 3 jack.
Hint
¡During the rear view camera is connecting to the AUX3 jack, if a rear monitor is connected, its display gets
black when the shift lever is set to the "R (reverse)" position. The display turns back when the shift lever is set
to the other position.
¡If you set REAR CAMERA
screen.
t WARNING
Do not back up the vehicle while watching only the video screen. Driver must look carefully in the direction the
vehicle is moving in addition to using rear view mirrors and this device.
t CAUTION
Please use the color rear view camera for avoid miss recognition of color system (PAL or NTSC).
on
of
, the image of the rear view camera
ON
SETTING
DISP
of
DISP
when you connect the other components other than rear view
ON
SETTING
DISP
on
of
,
(3-Rear IN) is not displayed on the AUX
OFF
on
SETTING
of
84

Advertisement

Table of Contents
loading

  Related Manuals for Sanyo AVC-100