Switching To Radio Mode; Selecting The Frequency Band - Sanyo FXD-680GD Service Manual

RADIO OPERATION FOR FXD-680GD, FXD685GD
SEL

SWITCHING TO RADIO MODE............................1

Press SOURCE button 1 to select radio mode, the radio mode appears in the display together with the memory
band and frequency.

SELECTING THE FREQUENCY BAND.................2

At radio mode, press BAND/LOUD button 2 shortly to select the desired band.
The reception band will change in the following order:
FM1
RADIO TUNING................................................3
Press the TUN/TRK
until "MANUAL" appears on the display, the manual tuning mode is selected. If both buttons have not pressed for
several seconds, it will revert to seek tuning mode and "AUTO" appeared on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING.....................4
- Automatic memory storing
Press P.SCAN/AST button 4 for several seconds, the radio searches for 6 strongest stations and stores them
into the presets of the currently selected band.
- Program scanning
Press P.SCAN/AST button 4 shortly to scan preset station. When the field strength level is more than the
threshold level of stop level, the radio is holding at that preset number for several seconds with release mute,
then searches again.
STORING PRESET STATIONS .................................5
The preset buttons 5 can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and MW, LW) for convenient
access to your favorite stations.
2 6
7
FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW
5 4
8
FXD-680GD
FM2 FM3
or button 3 shortly to activate automatic seek function. Press for several seconds
SEL
1 3
MW LW
8
2 6
7
FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW
1
5 4
8
FXD-685GD
3