Replacing The Fusing Unit; Cleaning Of The Original Glass And Original Scanning Glass - Develop INEO 161 Service Manual

Field Service Ver. 1.0 Apr. 2005
3.3.17

Replacing the Fusing Unit

1. Remove the Rear Cover and Rear Right Cover.
31
NOTE
When removing the Fusing Unit, take care not to confuse the types of screw.
3.3.18

Cleaning of the Original Glass and Original Scanning Glass

4035D045AA
4035D046AA
4035D013AA
3. Periodical check
2. Unplug two connectors of the Fusing
Unit.
3. Open the Right Door.
4. Remove four screws and the Fusing
Unit.
NOTE
When removing the Fusing Unit, make
sure of the correct type of screws that
must be removed.
4035D144AA
1. Using a soft cloth dampened with
alcohol, wipe the Original Glass and
Original Scanning Glass clean of
dirt.
19