Table of Contents
Advertisement
- MASK ALL
To mask both PI and strong signal non-RDS station.
c.
Retune L, retune S
To determine the initial time of automatic TA
There are 2 modes: RETUNE L and RETUNE L.
- RETUNE L:180 seconds.
-
RETUNE S: 45 seconds.
Note: Retune mode is active for TA SEEK mode only.
d. DSP mode
DSP OFF > POP > ROCK > CLASS > FLAT.
At DSP OFF mode preset equalizer will be controlled by Bass/ Treble setting.
d. Loud mode
Use this mode to increase bass output (LOUD ON).
e.
ESP mode
(Electronic Shock
You can select the second of ESP as follow:
- ESP 12 second: for normal road condition.
ESP 45 second: for road condition extremely unusual.
-
f.
Beep mode
There are 2 modes:
- BEEP OFF: disable audible beep tone when any function is accessed.
- BEEP ON: enable audible beep tone.
g. Seek mode (Seek 1/ Seek 2)
You can choose from Seek tuning mode 1 and mode 2 by using Volume control.
While the desired Seek tuning mode is selected, the following operations can be performed:
-
SEEK1: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size.
Press and hold the Tuning up/ down button to seek the band in up or down direction and stop when a
Protection)
BEEP ON and BEEP OFF.
(Traffic Announcement)
16
search.
Advertisement
Table of Contents
