Hyundai H- CDM8045 Instruction Manual page 15

If you don t adjust VOL buttons within 3 seconds after selecting the desired mode, the unit will automatically
return to the current mode being displayed.
When EQ mode is activated, press SEL button to select modes: VOL/ BAL/ FAD.
BAS/ TRE are invalid.
Setting other characteristics
During FM mode, keep pressing SEL button on the remote controller or VOLUME knob on the front panel for 3
seconds to enter another selective mode in the following order:
a. TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP (Transport
Program) information for 5 seconds.
knob on the panel to select the desired mode:
- TA SEEK
During searching the radio retunes to a different station, which contains TP information.
- TA ALARM
During searching the radio does not retune but the "NO TP, TA" will be blinking on the display.
b. Mask mode
PI is referred to Different PI (Program Information) with same AF (Alternative Frequency) .
During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked,
in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the
misjudgment of the radio under interference.
VOLUME knob on the panel to select the desired mode:
- MASK DPI
To mask only the AF with different PI.
Press the VOLUME ( ,
TA ALARM and TA SEEK.
Press the VOLUME ( ,
MASK DPI M and MASK ALL.
15
) buttons on the RC or rotate the VOLUME
) buttons on the RC or rotate the