Charging The Headset And Storing The Headset System; Charging The Headset - Sennheiser D 10 series Instruction Manual

Charging the headset and storing the headset system

29 | D 10 series
Charging the headset and storing
the headset system

Charging the headset

Always store the headset in the base station to ensure that it is fully
charged when needed. The intelligent battery charging technology
prevents over-charging.
Place the headset into the magnetic holder of the base station.
The Headset LED lights up blue and the rechargeable battery is being
charged. The Charge status LED on the base station indicates the
charge status:
LED segment Required
(white = lit up) charging time
approx.
10 min.
approx.
20 min.
approx.
40 min.
approx.
60 min.
Shortly before the rechargeable battery is about to run flat, only one
LED segment lights up weakly. The Headset LED flashes red and you hear
three beeps. You have several minutes of battery reserve. When the
rechargeable battery is flat, the headset switches off.
f the headset is outside the range of the base station, it will switch
off after 30 minutes in order to conserve battery power.
Corresponds to a talk time of
Wideband Narrowband
approx. 2 hrs approx. 3 hrs
approx. 4 hrs approx. 6 hrs
approx. 6 hrs approx. 9 hrs
approx. 8 hrs approx. 12 hrs