18
Listening to audio using the headset
Listening to audio using the headset
You can listen to audio via a connected device. The following functions depend on the connected device.
X
Play the media on your connected Bluetooth device.
The LED on the dongle lights up blue.
x
If you receive and accept a call, audio playback is paused and restarts after the call – if supported by the
i
connected device.
Plays audio
Pauses audio
2x
Plays the next track in the playlist
3x
Plays the previous track in the playlist
Fast-forwards the track:
2x
X
Press and hold the button.
Rewinds the track:
3x
X
Press and hold the button.
19
Additional functions
Additional functions
Charging the headset battery
X
Connect the supplied USB cable to the USB socket of the headset and a USB socket of your computer.
USB-A
To end charging:
X
Disconnect the USB cable from the headset.
i
When the battery is flat, the headset turns off automatically.
Verifying remaining battery power
2x
LED
Remaining battery power
more than 61%
more than 21%
less than 21% – automatic voice prompt
ADAPT 200 series
Bluetooth
®
headset
The battery is being charged. The LED lights up depending
on the battery status of the headset and turns off when
the battery is fully charged.
LED
Battery status
100% – Battery fully charged
more than 61%
more than 21%
less than 21%
Some mobile devices indicate the battery status of the
headset.
You can retrieve information on the remaining battery
power at any time – except while you are in a call:
?
X
Press the power button.
The LED flashes shortly and a voice prompt is
announced.
When the battery power drops below 21%,
the LED flashes red and "Recharge headset"
is announced several times.