Additional Functions; Charging The Headset Battery - Sennheiser EPOS ADAPT 460 User Manual

20

Additional functions

Additional functions

Charging the headset battery

1
Use the supplied USB cable for charging
appropriate an external USB power adapter (output rating
of 500 mA or higher).
Pull carefully on the cover of the USB socket.
X
3
The LED lights up depending on the battery status of the
headset. The battery is being charged.
>>Permanent visible or some s/mins only?
• When the battery is flat, the headset turns off automatically.
i
• After long periods of non-use, it may take up to 5 minutes until the LED lights up.
Ending charging
1
Disconnect the USB cable from the headset.
X
ADAPT 460 | ADAPT 460T
and when
>>include power adapter or delete?
USB-A
In-Ear Wireless office headset
2
USB-A
Connect the USB cable to the USB socket of the
X
headset and a USB socket of your computer.
OR
Connect the USB-A plug to an external power adapter
X
and a power source.
LED Battery status
100% – Battery fully charged
more than 60%
more than 20%
less than 20%
2
Close the cover.
X
>>from MODI, ok?