Overview Of The Leds - Sennheiser D 10 series Instruction Manual

Product overview

Overview of the LEDs

Overview of the LEDs of the base station
Link LED
lights up blue
lights up red
flashes red
is off
Incoming call LED
flashes
Charge status LED (white = lit)
LED segment 1 flashes
LED segments 1 – 4 are lit
Overview of the LEDs of the headset
Headset LED
lights up blue
flashes blue slowly
flashes red 3 times
is off
flashes blue/red
Meaning
Active link to the headset
No link to the headset
Headset is muted
Standby mode, headset is within the
range of the base station, but no audio
link
Meaning
Incoming call
Meaning
Rechargeable battery
is almost flat
Rechargeable battery
is charged
Meaning
Headset is being charged in the base station
Active link to the base station
Rechargeable battery is almost flat
Standby mode or headset is switched off/
headset's rechargeable battery is fully
charged
Special pairing mode/direction of the volume
up/down function of the Audio button is
being changed
Pairing of an additional headset with the
base station/conference call
D 10 series | 8