Uniden AppCam 25HD User Manual page 30

If...
Bright white spots
appear at nighttime
Memory card error
Wrong date and
time are shown
Router signal
strength is weak
Limited internet
bandwidth
30
Try this...
The camera's infrared LEDs produce invisible light that
reflects off surfaces such as glass. Install the camera on
the other side of windows or place the lens flush against
the surface to improve the night vision.
Please check the environment rating (Ingress) of
the camera(s) before installing outdoors.
Make sure the memory card is correctly inserted and
formatted.
Please backup the data before formatting. This
Format function will erase all data on the memory
card.
• Make sure you've selected the correct time zone.
Unexpected date and time can result in an incorrect
recording schedule. (See page 21)
• Confirm the system date/time of the mobile device to
ensure correct operation.
• Change router/camera relative position.
• Use the Ethernet cable to physically connect the
AppCam 25HD camera to your router.
• Use a Wi-Fi repeater/extender to maximize the service
range of your Wi-Fi router.
• Switch your router to 11b/11g mode in order to improve
router service range.
• Avoid more than two users accessing the AppCam
25HD at a time.