Step 2 - Connect Camera And Mobile Device; Step 3 - Connect Camera And Wifi Router - Uniden AppCam 25HD User Manual

to Ethernet cable, provided. Connect to power. Go to Step 2 in the next
section, Connect Camera and Mobile Device.
STEP 2 – CONNECT CAMERA AND MOBILE DEVICE
1. From your device's Settings, go to WiFi. Select the AppCam 25HD to connect
your device to it. The camera listing will be HD-XXXXXX where XXXXXX are
the last 6 digits on the camera label. Enter the default password, 12345678.
Your mobile device is now connected to the camera.
2. Launch the app and tap the Add New System icon.
3. The System Information screen displays. Name the camera and tap
Search.
4. The Search in LAN results box displays. The camera's DID
should display. Tap the DID number.
5. The System Information screen displays again. This time,
enter the security code (123456); tap Save. Tap YES, then OK at the next
prompts.
6. The Globe screen displays. Tap the Globe to access Live view.
7. Since this is the first time you connect to Live view, you must change the
security code. Once you change the security code, you will not be asked
again.
8. The app now displays live video.
STEP 3 – CONNECT CAMERA AND WIFI ROUTER
1. From the Live view, tap Back icon (
System Setting icon (
2. Tap Advanced. Enter the Admin password (123456).
3. Scroll to WiFi on the Advanced Settings list. Tap Manage WiFi Network. Select
your router from the drop-down list and enter your router's password. Tap
Connect.
), the System icon (
). The System Information screen displays.
), and then the
11