Eton America Beamer PN2 Service Manual page 57

Service Bulletin
Bulletin No: 0033
Date: 04/01/2004
To adjust the oil pump flow on a two cycle oil injected engine you must adjust the oil pump cable length. . The
Oil pump cable is located on the right hand side of the engine just above the (RH) A-arm
To reduce the oil flow you must lengthen the cable by loosening the lock nut and turning the adjusting nut
counter clockwise then retighten the locking nut. To increase the oil flow you would shorten the cable by
turning the adjusting nut clockwise.
ETON America, LLC
Oil Pump Flow Adjustment
all Oil Injected two cycle Engines
Oil Pump
Oil Pump Cable Location