Eton America Beamer PN2 Service Manual page 46

Unscrew two taper screws of the body cover near
the footrest board. Remove the body cover.
Unscrew three fixing screws of the battery cover at
footrest board.
Remove the battery cover.
Disconnect the negative terminal of the battery, then
disconnect the positive terminal. Remove battery.
Unscrew the fixing screws of the lower cover.
Remove the lower cover.
Unscrew three screws of the leg shield.
Remove the leg shield.
Beamer Rev-2.0.2 Page 46 of 55 11/21/2005