Eton America Beamer PN2 Service Manual page 19

DISASSEMBLY
Unscrew the float chamber screws and remove the
float chamber.
Disassemble the float arm pin, float and float needle
valve.
Inspect the seat of the float needle valve for wear or
damage.
Disassemble the idle jet, main jet, idle speed
adjustment screw, and idle mixture adjustment screw.
Main Jet
Inspect all jets and screws for wear or damage.
Clean the passages and jets with compressed air.
Pilot Jet
ASSEMBLY
Clean all parts in solvent and blow it dry with
compressed air. Assembly is the reverse order of
disassembly.
Beamer Rev-2.0.2 Page 19 of 55 11/21/2005