Ip Configuration; Dmtool - Crestron DM-TX-201-C Operations & Installation Manual

DigitalMedia 8G+™ Transmitter 201
24 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C

IP Configuration

If the DM-TX-201-C is used in a standalone configuration (i.e., not connected to a
DM switcher), use Crestron Toolbox to create the IP table entry of the
DM-TX-201-C.
NOTE: If the DM-TX-201-C is connected to a DM switcher, the IP table entry of
the DM-TX-201-C is created automatically.
1. Use the Device Discovery Tool to find the IP address of the DM-TX-201-C.
Then, in the Toolbox, display the "System Info" window (click the
icon) and select the DM-TX-201-C entry from the Address Book.
2. Select Functions | IP Table Setup.
3. Add, modify or delete entries in the IP table. The DM-TX-201-C can have
only one IP table entry.
4. A defined IP table can be saved to a file or sent to the device.

DMTool

In the Crestron Toolbox Address Book, select the DM-TX-201-C. Then use the
DMTool to configure EDID, HDCP or to troubleshoot AV on the DM-TX-201-C.
Refer to the help file for additional information.
DMTool
Crestron DM-TX-201-C
DMTool
Operations & Installation Guide – DOC. 6958B