Notification Settings; Wake-Up Alarm - Epson PS-100 Series User Manual

Notification Settings

Depending on your settings the product can alert you by vibration and/or LEDs when you receive an E-mail, call
or calendar notifications on your smart device.
To alert you the LEDs will light up six times as shown in the below pattern and will vibrate once if vibrate is
enabled in the settings.
You need to enable the notification settings in the Device settings in PULSENSE View. See PULSENSE View
help section for details.
Note:
The PS-100 must be connected via Bluetooth
required in the Notifications Settings of your smart device. See your smart device manual for details.
Some Android devices may not support this function.

Wake-up Alarm

You can use the wake-up alarm to wake you up at the optimal time. The PS-100 will examine your sleep state for
a given window before your alarm time. Within that window PULSENSE will trigger the alarm (vibration) in a
phase of shallow sleep so it is easy to wake up.
To alert you the LEDs will light up six times as shown in the below pattern and will vibration if vibrate is enabled in
the settings.
You need to set the alarm time and window time in the Device settings in PULSENSE View. See the PULSENSE
View help section for details.
®
to your smart device. Some additional settings might be
Additional Functions  31