Download Print this page

Start-Up Operation - Epson PS-100 Series User Manual

Hide thumbs

Advertisement

4
Detach the charging cradle from the product
Press the clip and push from behind with your finger to release the product.
The product will be ready for configuration when fully charged and detached from the charging cradle.

Start-up operation:

All LEDs light up in sequence and the PS-100 will vibrate
! Important
- Pair with your smart device after purchase. The time will be set on the PS-100 from your smart device.
The memory of your device will not be enabled until pairing is completed.
- If you remove the PS-100 from your wrist and no movement is detected, it will go into sleep mode. It will
re-wake if the product is moved.
Set up and Basic Operation  16

Advertisement

loading

  Also See for Epson PS-100 Series