Epson PS-100 Series User Manual page 15

3
Using an AC adapter
Connect the charging cradle with the AC adapter, and then insert the AC adapter into the power socket.
We recommend using the specified AC adapter (SFAC03 for UK and Ireland. SFAC02 for Europe excluding
UK and Ireland.)
Note:
- An orange LED will be shown while charging and the LED will change to blue when the PS-100 is fully
charged
- Charging takes approximately 1.5 to 2.5 hours to complete; however, the duration may vary.
! Important
- The remaining battery charge cannot be checked with the product. Check the remaining battery charge
under device settings in the PULSENSE VIEW app.
- Please note that even if not used, the PS-100 should be charged at least once within a 6 month period.
Failing to do so might effect the performance of the rechargeable battery.
- Battery is not replaceable.
Set up and Basic Operation  15