Download Print this page

How To Stop And Resume Heart Rate Measurement - Epson PS-100 Series User Manual

Hide thumbs


How to stop and resume heart rate measurement

Heart rate detection will stop if the product is not worn and has not been moved for three minutes. Heart rate
detection will start again when the product has been moved.
The below LED pattern will be shown when the PS-100 has been removed from your wrist.
Place the product onto a flat surface when you stop measurement.
It may take one to six minutes until the measurement will stop.
Resume heart rate measurement place the PS-100 onto your wrist and tighten the bands.
How to Use  26



  Also See for Epson PS-100 Series