Table of Contents
Advertisement
Galaxy RAID GALHDX-7370S-8+12U4D Installation and Hardware Reference Manual
4.3.5 LCD Screen
When powering on the subsystem, the following messages should appear on the front
panel LCD screen. Wait for the front panel LCD to show "READY" or "No Host
LUN" before the host boots up. Refer to Figure 4- 11 on how to read the screens.
The LCD screen startup sequence is shown and described in the sequence below:
Initializing....
Please Wait...
Power on Self
Test, Please Wait...
Power on Self
Test Completed
GALAXYHD
128MB RAM, Wait...
GALAXYHD
No Host LUN
4-10
Model Name
GALAXYHD
Ready
Status/Data Transfer Indicator
Figure 4- 11: The LCD Initial Screen
This screen appears when the PSUs are turned on.
Proceeding with controller self-test.
Self-test completed.
Verifying installed cache memory.
System is ready. You can now start to configure
the subsystem.
Power On
Advertisement
Table of Contents
