Drive Tray Leds - Rorke Data Galaxy Raid GALHDX-7370S-8U4D Installation And Hardware Reference Manual

Galaxy RAID GALHDX-7370S-8+12U4D Installation and Hardware Reference Manual

3.2.5 Drive Tray LEDs

Two LED indicators are located on the right side of each drive tray. (See Figure 3- 4)
Refer to Table 3- 5 for LED definitions. When notified by a drive failure message,
you should check the drive tray indicators to find the correct location of the failed
drive. Replacing the wrong drive can cause fatal failure of a logical array.
LED Name
Drive Busy
Power
Status
3-6
Figure 3- 4: Drive Tray LEDs
Color Status
ON indicates read/write activity on the drive.
Blue
OFF indicates there is no read/write activity on the drive.
GREEN indicates that power is being supplied to the
Red/
drive.
Green
OFF indicates no power is being supplied to the drive or
the drive tray is not properly installed. .
RED indicates drive failure or faults have occurred.
Table 3- 5: Drive Tray LED Definitions
Status-indicating LEDs