Galaxy RAID GALHDX-7370S-8+12U4D Installation and Hardware Reference Manual
Configuration over Hyper Terminal
Figure
Select from Main Menu, "View and Edit Channels," press [ENTER] on a channel
you wish to change its termination mode, and select "SCSI Terminator" by pressing
[ENTER]. Depending on the current setting, select Yes or press ESC to complete the
configuration process.
4-4
- 6: The Terminator Option on Terminal Screen
4
Using the LCD Keypad Panel
Figure
- 5: LCD Keypad
4
Navigation Flow
SCSI Connection Overview