Chapter 4: Connection and Operation
Via RAIDWatch GUI
Figure
7: The Terminator Option in RAIDWatch Screen
4-
Select from RAIDWatch's navigation tree, "Configuration," "Channel," and click on
a channel (host) you wish to change its termination mode, and click on one of the
check circles besides "Termination." Click the "Apply" button to complete the
configuration process.
Typically, the server or host adapter (SCSI card inside the server) is the first device
and is already terminated. When installing the subsystems on a SCSI bus with other
devices, be sure to observe the above rules with all devices on the SCSI bus. Consult
the documentation for your server and/or host adapters for additional information on
correct termination procedures.
4-5
SCSI Connection Overview