Subscribing / Renaming / Unsubscribing Bluetooth Headset; Telephoning Via The Bluetooth Headset - Aastra 610d User Manual

When using a headset (Bluetooth or cable connected) and the handsfree key is
pressed on the mobile unit, the call is definitely continued via the loudspeaker of the
mobile unit.
If the mobile unit and the Bluetooth headset become disconnected during a call, a
message appears on the display. You can decide whether you wish to continue the
call with a cable-connected headset or on the mobile unit itself or whether to end the
call.

Subscribing / Renaming / Unsubscribing Bluetooth Headset

Checking in
To do so, switch the headset into the "Pairing mode". Please refer to the user guide of
the headset to do so.
1. Switch the function on (On) in the
2. Open the > Settings > Bluetooth > Subscribe headset menu and then press
the New softkey.
3. The name of the headset found appears on the display. Confirm the display with
Ok and enter the headset PIN.
Now the headset is checked in and the
display.
You determine the respectively active headset in the
Select headset menu.
Renaming
Select the menu entry
name] > Edit.
Checking out
Select the menu entry
name] > Delete.

Telephoning via the Bluetooth Headset

Accepting a call
Press the corresponding "call key" on the headset or the
mobile unit. The
> Settings > Bluetooth > Subscribe headset > [Headset
> Settings > Bluetooth > Subscribe headset > [Headset
symbol appears.
> Settings > Bluetooth > BT Status menu.
symbol appears in the upper line of the
> Settings > Bluetooth >
Basic Functions
receiver key on the
47