Intercom - AT&T CL82113 Complete User's Manual

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. You can
purchase expansion handsets (model AT&T CL80113) for this telephone base
to expand your telephone system (up to 12 handsets).
Using a handset to initiate intercom calls:
Press MENU/
1.
Press q or p
CID
/SELECT.
MENU
• If you have a two-handset system, the handset shows
Calling other handset.
• If you have more than two handsets, the handset shows
INTERCOM
handset number (1-9 for handsets 1-9,
by 0-2 for handsets 10-12, or TONE followed by # for
all handsets),
desired handset and press
screen shows Calling HANDSET X, or
Calling all handsets.
The destination handset(s) rings and shows HANDSET X is
calling or HANDSET X is calling all
the handset name, X represents the handset
2. To answer the intercom call, press
dialing key (0-9, TONE , or # ) on the called handset. Both handsets now
show Intercom.
3. To end the intercom call, one party presses
handset back in the telephone base or charger. The other party hears four
beeps. Both handsets display Intercom ended.
NOTES:
• Before the intercom call is answered, you can cancel it by pressing
• If the called handset does not answer within 100 seconds, or the handset is in use, on a call or
out of range, the initiating handset shows No answer. Try again.
• To temporarily silence the intercom ringer, press
• You can only use one pair of handsets at a time to make intercom calls.
in idle mode to enter the main menu.
SELECT
to scroll to Intercom, then press
DIR
TO: Use the dialing keys to e e nter a specific
q
or press
CID
TONE followed
or p
to scroll to the
DIR
/SELECT.
Your handset
MENU
(HANDSET represents
number).
PHONE/
OFF/CANCEL or MUTE/
30
, /SPEA�ER SPEA�ER or any
FLASH
OFF/
, or place the
CANCEL
The other party hears four
/CANCEL CANCEL.
OFF
DELETE
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35 12/02
AM
.