Remote Access Code - AT&T CL82113 Complete User's Manual

Answering system
Answering system settings
4. Press q or p
CID
/SELECT.
MENU
5. Press q or p
CID
Toll saver.
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
NOTES:
• If you subscribe to voicemail service through your telephone service provider,
see Answering system and voicemail indicators on page 62.
• If you set the number of rings for the answering system as two or three rings, the caller ID
announce feature may not have enough time to announce the caller's full information.

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
To change the remote access code:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
/SELECT.
press
MENU
4. Press q or p
CID
/SELECT.
MENU
5. Use the dialing keys to enter a
/DELETE to backspace and delete a digit.
MUTE
6. Press /SELECT to save the setting. You hear a
MENU
confirmation tone.
to scroll to # of rings, then press
DIR
to choose among 2, 3, 4, 5, 6 or
DIR
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to scroll to Remote code, then press
DIR
two-digit number. Press
SELECT
59
Call screening
># of rings
# OF RINGS
>4
Play messages
to
>Answering sys
Answer ON/OFF
>Ans sys setup
REMOTE CODE
19