Caller Id Announce - AT&T CL82113 Complete User's Manual

Telephone settings
Handset settings

Caller ID announce

The caller ID announce feature lets you know who's calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks "Call from..." and the name of the caller based on the directory
or caller ID information. If the caller's name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller's phone
number is also private or unknown, no information will be announced. The
default setting is On.
To turn on or off the caller ID announce feature:
1. Press MENU/
2. Use q or
CID
/SELECT.
MENU
3. Use or
q
CID
press /SELECT.
MENU
4. Use q or
CID
press /SELECT.
MENU
• Set all On/Off - Change the setting for the base and
all handsets.
• Local handset - Change the setting for that handset only.
• Base - Change the setting for the telephone base only.
5. Use q or
CID
/SELECT. There is a confirmation tone and the screen
MENU
returns to the previous menu. If you change the setting to
Set all On/Off, the screen shows CID Annc ON/OFF on all HS & BS.
NOTES:
• To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
• When there are up to five handsets registered, the telephone system supports caller ID announce
for all handsets. If six or more handsets are registered, the system supports caller ID announce for
the first four registered handsets only.
• This feature does not announce information for call waiting calls.
• It takes at least 2 rings for the phone to receive caller ID information and announce it. If the
phone is answered before the end of the second ring, the phone won't have time to announce
the caller's information.
• Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
• Caller ID announce is available in English only.
in idle mode to enter the main menu.
SELECT
p to scroll to Settings, then press
DIR
to scroll to Caller ID annc, then
p
DIR
p to highlight the desired option, then
DIR
p to highlight On or Off, then press
DIR
15
LCD language
>Caller ID annc
CALLER ID ANNC
>Local handset
HS CID ANNOUNCE
>On