Intercom - AT&T CRL32302 Complete User's Manual

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. Intercom
is not available for the CRL32102 model. You can buy accessory handsets
(AT&T model CRL30102) to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/
pDIR to scroll to >Intercom, then press
following options.
• If you have a two-handset system, your handset
screen shows Calling other handset.
• If you have more than two handsets, your screen
shows INTERCOM TO:. Use the dialing keys to e e nter
a specific handset number (1-9 for handsets 1-9,
TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all handsets), or press
qCID or pDIR to scroll to the desired handset and
press
MENU
Calling HANDSET X or Calling all handsets.
The other handset(s) rings and shows Other handset
is calling, HANDSET X is calling all or HANDSET X is
calling (X represents the handset number).
2. To answer the intercom call, press
/SPEA�ER SPEA�ER or any dialing key (0-9, TONE , or #) on
any called handset. Both handsets now show Intercom.
3. To end the intercom call, one party presses
OFF/CANCEL, or places the handset back in the telephone base or
charger. The other party hears four beeps. Both handsets display
Intercom ended.
NOTES:
• Before the intercom call is answered, you can cancel it by pressing
• If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID
log, on a call, or out of range, the calling handset shows No answer. Try again.
• Pressing OFF/
• You can only use one pair of handsets to make intercom calls at a time.
in idle mode to enter the main menu. Press qCID or
SELECT
/SELECT. Your handset screen shows
or MUTE/
CANCEL
MENU
PHONE/
temporarily silences the intercom ringer.
DELETE
29
/SELECT. Choose from the
press
Intercom
,
FLASH
10:30
/CANCEL.
OFF
Calling
HANDSET 1
HANDSET 2
is calling
10/20
PM