Installation You must install and STOP! See pages 2-4 charge the battery before for easy instructions. using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall.
Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. Telephone base installation • Plug one end of the telephone line cord into the telephone jack on the bottom of the telephone base.
Battery installation and charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use.
Page 5
Battery installation and charging CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. SET DATE --/--/-- SET TIME After you install your telephone or power returns following --:-- -- a power outage, the handset will prompt you to set the date...
Quick reference guide - handset MENU/SELECT CHARGE indicator Press to show the menu. On when the handset is charging in the telephone base While in the menu, press to or charger. select an item or save an entry or setting. qCID/-VOLUME pDIR/VOLUME+ Press qCID to show caller ID...
Quick reference guide - handset During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing. Main menu Main menu The > symbol highlights Play messages a menu item. Answering sys Directory >Play messages...
Quick reference guide - telephone base X/DELETE Message counter Press to delete the Number of messages message currently playing. (or during playback, message number Press twice to delete all currently playing). old messages when the phone is not in use. /PLAY/STOP Press to start or stop message playback.
Answering system settings Announcement Your outgoing announcement plays when calls are answered by the answering system. The telephone has a default outgoing announcement, “Hello. Please leave a message after the tone.” You can use this announcement, or record your own. You can record an announcement up to 90 seconds.