AT&T CL82311 Quick Start Manual

Quick start guide
CL82311/CL82321
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user's
manual provided in the package, or see the online Complete
user's manual at www.telephones.att.com/manuals.
Telephone base installation
Plug the power cord
Route the
and telephone line
cords through
cord into the jacks.
the slot.
Raise the
antenna.
If you have DSL
high-speed Internet
Plug the other end
service, a DSL
filter (not included) of the telephone
is required. The
line cord into a
DSL filter must be
telephone jack or
plugged into the
a DSL filter.
telephone wall jack.
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
www.telephones.att.com
our website at or call
1 (866) 288-4268
In Canada, dial .
Battery installation
Install the battery as shown below. Charge your handset(s) before initial use.
The battery is fully charged after 10 hours of continuous charging.
1 2
1. Plug the battery 2. Align the cover
connector securely flat against
into the socket inside the battery
the handset battery compartment,
compartment. Insert the then slide it
supplied battery with upwards until it
the label THIS SIDE UP clicks into place.
facing up as indicated.
Use only the supplied rechargeable battery or replacement battery (model BT166342).
Quick reference guide
q
CID/VOLUME
• Show caller ID history.
• Scroll down in menus.
• Move cursor to the left when
entering names or numbers.
• Decrease listening volume when
on a call, or decrease message
playback volume.
MUTE/DELETE
• Mute the microphone during a
call.
• Delete the displayed entry while
in the directory, call log or redial
list.
• Delete digits or characters when
using the dialing keys.
PHONE/FLASH
• Make or answer a call.
• Answer a call waiting call during
Charger installation
a call.
1
• Press repeatedly to add or
remove 1 in front of the call log
entry before dialing or saving it
to the directory.
• Press and hold to set or dial your
voicemail number.
Plug the power
TONE
adapter into an
Press to switch to tone dialing
electrical outlet not
temporarily during a call if you have
pulse service.
controlled by a wall
switch.
/SPEA�E� SPEA�E�
Switch between the speakerphone
and handset.
1 (800) 222-3111
.
Handset
side view
3
/ANSWE� ON
Turn the built-in answering
system on or off.
Message counter
Shows the number
of messages or other
answering system
information.
3. Charge the handset by
placing it face forward /�EPEAT
in the telephone base • Repeat a message.
• Press twice to play the
or charger.
previous message.
Handset
pDI�/VOLUME
• Show directory entries.
• Scroll up in menus.
• Move cursor to the right when
entering names or numbers.
• Increase listening volume when
on a call, or increase message
playback volume.
MENU/SELECT
• Show the menu.
• Select an item or save an entry
or setting while in the menu.
OFF/CANCEL
• Hang up a call.
• Press to cancel an operation,
back up to the previous
menu, or exit the menu display,
or press and hold to return to
idle mode
• Press and hold in idle mode to
erase missed call indicator.
�EDIAL/PAUSE
• Press repeatedly to view the last
10 numbers dialed.
• Press and hold to insert a dialing
pause while entering numbers.
# (pound key)
Press repeatedly to display other
dialing options when reviewing a
caller ID log entry.
EQ
Change the audio quality to best
suit your hearing.
Push to talk
• Press to initiate a one-to-one or
one-to-group broadcast.
• Press and hold to broadcast
to a group of handsets.
Telephone base
X/DELETE
• Delete the message
currently playing.
• Press twice to delete
all old messages when
in idle mode.
q/VOL/p
• Adjust the listening
volume during
message playback.
• Adjust the base ringer
volume when in idle
mode.
/PLAY/STOP /S�IP
Start or stop message Skip to the next message.
playback.
Initial settings
We recommend you program your telephone system before use.
The following are a few examples of common features to set before using the
telephone. Refer to the Handset settings and Answering system settings in
the Abridged user's manual or the online Complete user's manual for detailed
instructions on setting all telephone features.
Set date/time
Set the date/time before using the answering system.
1. MENU -> q or p -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys -> SELECT.
3. Enter the hour and minute using the dialing keys.
4. q or p to choose AM or PM -> SELECT.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it
with your own recorded announcement.
1. MENU -> q or p -> Answering sys -> SELECT.
2. SELECT to select Announcement.
3. q or p -> �ecord annc -> SELECT.
4. Facing the handset, record your announcement and press 5 to end recording.
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5 or
6 rings, or toll saver. If you choose toll saver, the answering system answers a
call after 2 rings if you have new messages, or after 4 rings when there are no
new messages.
If you want the built-in answering system instead of the voicemail to answer
a call, you should set the answering system to answer a call at least 2 rings
before the voicemail is set to answer. Contact your telephone service provider
for information on your voicemail settings.
MENU -> q or p -> Answering sys -> SELECT.
1.
2. q or p -> Ans sys setup -> SELECT.
3. q or p -> # of rings -> SELECT.
4. q or p -> choose among 2, 3, 4, 5, 6 or Toll saver -> SELECT.
Handset ringer volume
You can set the ringer volume level to one of the six levels or turn the
ringer off.
1. MENU -> q or p -> �ingers -> SELECT.
2. SELECT to select �inger volume.
3. q or p to choose the desired level -> SELECT.
Reset language to English
If you have accidentally changed the screen display language and want to
switch it back to English, follow the steps below.
• MENU in idle mode-> enter 364#.