Intercom Calls - AT&T E2912B User Manual

INTERCOM
Telephone operation

Intercom calls

You can use the intercom feature to have conver-
sations between the handsets.
1. Press the
INT
2. The display will read CALLING OTHER HANDSET.
3. The other handset will ring and its screen will
display OTHER HANDSET IS CALLING.
4. Press ,
INT PHONE/
pad key (0-9, *, or #) on the other handset to
answer the call.
To end the intercom call:
• Press
OFF/
CLEAR
-OR- OR-
• Place the either handset in the charger or tele-
phone base.
NOTES:
1. Pressing INT while on an external call will initiate call
transfer (see page 17).
2. While a handset is in the directory or caller ID log, or out
of range, the intercom feature cannot be used.
3. If the other handset does not answer the intercom call
within 100 seconds, the originating handset will show
UNABLE TO CALL TRY AGAIN.
Handling incoming calls
The telephone will beep if there is an incoming
call during an intercom conversation. You can
either:
• Press
PHONE/
and answer the incoming call.
-OR-
• Press or
INT
com connection without answering the incom-
ing call. The incoming call will continue to ring.
15
button on a handset.
,
SPEAKER
FLASH
or on either handset.
INT
to end the intercom call
FLASH
to disconnect the inter-
OFF/
CLEAR
or any dial-