ZyXEL Communications UAG2100 User Manual page 334

Figure 221 Configuration > Object > Auth. Method > Add
The following table describes the labels in this screen.
Table 167 Configuration > Object > Auth. Method > Add
LABEL DESCRIPTION
Name Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. For example, "My_Device".
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to modify the entry's settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Move To change a method's position in the numbered list, select the method and click Move to
display a field to type a number for where you want to put it and press [ENTER] to move
the rule to the number that you typed.
The ordering of your methods is important as UAG authenticates the users using the
authentication methods in the order they appear in this screen.
# This field displays the index number.
Method List Select a server object from the drop-down list box. You can create a server object in the
AAA Server screen (see
The UAG authenticates the users using the databases (in the local user database or the
external authentication server) in the order they appear in this screen.
If two accounts with the same username exist on two authentication servers you specify,
the UAG does not continue the search on the second authentication server when you enter
the username and password that doesn't match the one on the first authentication server.
OK Click OK to save the changes.
Cancel Click Cancel to discard the changes.
Chapter 37 Authentication Method
Chapter 36 on page 328
UAG2100 User's Guide
334
for more information).