Object References - ZyXEL Communications UAG2100 User Manual

Table 51 Configuration > Network > Interface > Ethernet > Edit (continued)
LABEL
Add
Edit
Remove
#
IP Address
MAC
Description
MAC Address
Setting
Use Default MAC
Address
Overwrite
Default MAC
Address
Related Setting
Configure
PPPoE/PPTP
OK
Cancel

10.3.2 Object References

When a configuration screen includes an Object Reference icon, select a configuration object and
click Object Reference to open the Object Reference screen. This screen displays which
configuration settings reference the selected object. The fields shown vary with the type of object.
Figure 70 Object References
Chapter 10 Interfaces
DESCRIPTION
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
This field is a sequential value, and it is not associated with a specific entry.
Enter the IP address to assign to a device with this entry's MAC address.
Enter the MAC address to which to assign this entry's IP address.
Enter a description to help identify this static DHCP entry. You can use alphanumeric
and ()+/:=?!*#@$_%- characters, and it can be up to 60 characters long.
This section appears when Interface Type is external. Have the interface use either
the factory assigned default MAC address, a manually specified MAC address, or clone
the MAC address of another device or computer.
Select this option to have the interface use the factory assigned default MAC address.
By default, the UAG uses the factory assigned MAC address to identify itself.
Select this option to have the interface use a different MAC address. Either enter the
MAC address in the fields or click Clone by host and enter the IP address of the device
or computer whose MAC you are cloning. Once it is successfully configured, the address
will be copied to the configuration file. It will not change unless you change the setting
or upload a different configuration file.
Click PPPoE/PPTP if this interface's Internet connection uses PPPoE or PPTP.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving.
UAG2100 User's Guide
117