ZyXEL Communications UAG2100 User Manual page 268

Figure 181 System Status Example
System Status
--------------------------------------
Item Description
--------------------------------------
SYST 02:02:35
WAST Link up
WLST Activate
FWVR 2.50(AACG.0)
BTVR 1.22
WAMA 00-90-0E-00-4A-29
LAMA 00-90-0E-00-4A-30
WAIP 10.21.2.267
LAIP 172.16.0.1
WLIP 10.59.1.1
DHSP 10.59.1.33
DHEP 10.59.1.254
--------------------------------------
CPUS
MEMS 40%
DKST
--------------------------------------
2012/04/12 17:10:22
---End---
The following table describes the labels in this report.
Table 127 System Status
LABEL DESCRIPTION
SYST This field displays the time since the system was last restarted.
WAST This field displays the WAN connection status.
WLST This field displays the status of the UAG's wireless LAN.
FWVR This field displays the version of the firmware on the UAG.
BTVR This field displays the version of the bootrom.
WAMA This field displays the MAC address of the UAG on the WAN.
LAMA This field displays the MAC address of the UAG on the LAN.
WAIP This field displays the IP address of the WAN port on the UAG.
LAIP This field displays the IP address of the LAN port on the UAG.
WLIP This field displays the IP address of the wireless LAN interface on the UAG.
DHSP This field displays the first of the continuous addresses in the IP address pool.
DHEP This field displays the end of the continuous addresses in the IP address pool.
CPUS This field displays the UAG's recent CPU usage.
MEMS This field displays the UAG's recent memory usage.
DKST This field displays what percentage of the UAG's onboard flash memory is currently being
used.
Chapter 27 Printer Manager
5%
5%
UAG2100 User's Guide
268