ZyXEL Communications UAG2100 User Manual page 242

Figure 161 Firewall Example: Firewall Screen
At the top of the screen, click Create new Object > Address to configure an address object.
2
Configure it as follows and click OK.
Figure 162 Firewall Example: Create an Address Object
Click Create new Object > Service to configure a service object for Doom (UDP port 666).
3
Configure it as follows and click OK.
Figure 163 Firewall Example: Create a Service Object
Select From WAN and To LAN and enter a name for the firewall rule.
4
Select Dest_1 for the Destination and Doom as the Service. Enter a description and configure
the rest of the screen as follows. Click OK when you are done.
Chapter 25 Firewall
UAG2100 User's Guide
242